PRODUK DETAIL
Reciprocating Compressor
WBHE-Series
The New WBHE Series
has been designed as an advanced compressor
from our popular WB&B series, a compressor type
that has proven its reliability and service friendly design with more than 15 000 compressors
installed in the fi eld over 50 years worldwide in
industry.
Our WBHe series is designed to operate with the
natural refrigerants (nH3, hydro carbons) HFc’s
(R507, R404a, R134a, etc.) and cFc’s and is suitable
for cooling, freezing and air conditioning sys- tems.
the major structural changes on the new WBHe are
the new shaft seal, thrust bearing and main bearing
upgrade. For the models 6WBHe and 8WBHe we
can offer cylinder (instead of bank-) step control
and optional 100% unloaded running.rpm.
WBHE-Series
PRODUK DETAIL
Reciprocating Compressor
L-Series
Applications
Developed for exclusive use with ammonia refrigerant, this series of compressors is suitable
for refrigeration and freezing applications on land
with smaller load requivment.
Space and Weight Saving Design
A 4-pole motor can be directly connected to the
compressor. Hydraulic lines for capacity control
are incorporated into the casing design, allowing
simplified package designs and easy maintenance.
Covers a Wide Range of Loads
Delivers powerful performance with adaptability
to wide operation ranges from 1000 to 1800 rpm.
L-Series
PRODUK DETAIL
Reciprocating Compressor
WA-Series
Applications
With a high-pressure design suitable for use in
air-cooled condensing units for fluorocarbon
refrigerants, the model serve small- to mediumscale deep freezing applications.
Usable Ingredients
Natural Refrigerants
Ammonia
Fluorocarbon Refrigerants
R404A
R507A
High-Reliability
A long-selling model with high reliability and track record, designed for tough applications subject to load fluctuation.
WA-Series
PRODUK DETAIL
Reciprocating Compressor
M II-SERIES
High Performance Derived from New Design
This newly designed compressor minimizes internal heating of the intake gas resulting in Ammonia the highest level of performance in our product 400 portfolio.
Much Improved Overhaul intervals
The MII series incorporates a new valve structure with improved durability and dramatically extended overhaul intervals of 16,000 hours.
Applications
This model serve large-scale deep freezing applications.
M II-SERIES
PRODUK DETAIL
Tube Ice Machine
The machine includes the main refrigeration parts
typical in refrigeration technology, ice drums and
cold systems, processed to meet JIS / ASTM standards.
Electrical cabinets are designed and operated
automatically with electrical equipment of famous
brands such as Schneilder, Omron, Siemen,
Water is fed into the system and frozen in the form
of an ice tube. Up to a preset time, the system
automatically switches to defrost mode. The stone
tube will be cut by knife to the length required by
the original customer.
Round tubular stone has the height and diameter
to suit the needs of the customer. The thickness
of the stone ensures the correct design capacity.
The amount of produced ice is contained in a
bucket of ice to be shipped out for packing.
Out of ice, water is automatically put into the drum
and the operation cycle continues.
For medium and large businesses, using a tube
ice machine can help control and produce good
quality ice for the business by yourself.
Tube Ice Machine
PRODUK DETAIL
WXRB Series
WXRD/B Series Evaporative Condenser uses waterand
air as cooling medium. The cooling medium exchanges
the heat with high-heat gaseous refrigerant medium
and hence the refrigerant medium becomes liquid.
Inside, there are water dispatching system, condensing
coils/plates, wet padding heat exchange
layer and dehydrator and so on.
Outside, there are water circulating pump, an
electronic water-curing device and propeller fans on
the top of condensing coil/plate. The propeller fan
strengthens the flow of the air and causes negative
pressure inside. When the condenser works, the cooling water is sprayed from water dispatching system
to the surface of condensing coils/plates equably to
form a thin layer of water film. The high-heat steam of
refrigerant medium enters from the top of condensing
coil/plate and then the cooled liquid refrigerant medium
is discharged from the bottom of the condensing coil/
plate. During this process, high-heat refigerant medium exchanges the heat wih the waterand air outside
the coillplate and Increases the efficiency of medium
exchange with the help of wind.
WXRB Series
PRODUK DETAIL
HEATAWAY
Evaporative Condenser
Tube Ice Machine
Structure – Principles of
Tube Machine
WXRB Series
Evaporative Condenser
With our newly designed water spray and quick
refilling connection, maintenance is now 2x faster
without any need of tools.
EC7 is developed to reduce water loss by a
dual-arm float valve and the bleed-off guideline.
Water pumps and fans are available with IE3*
motors. The premium efficiency motors reduce
energy consumption without compromising on the
power. (*Optional feature)
Because your safety matters to us, stay safe with
our safety accessories, platform and fan guard designed in compliance with OSHA 1910 and AS 1657
international safety standard.
HEATAWAY
PRODUK DETAIL
LRC-H Square Cross Flow Cooling Tower
a wedge-shaped belt manufactured out a rubber
compound, reinforced with a tensile cord specifically
engineered to transmit power into movement. V-belts
can be found in driving mechanisms, such as engines
in air compressors, fans, and pumps.
LRC-H Square Cross Flow Cooling Tower
PRODUK DETAIL
LHC Heavy Duty Cross Flow Cooling Tower
a wedge-shaped belt manufactured out a rubber
compound, reinforced with a tensile cord specifically
engineered to transmit power into movement. V-belts
can be found in driving mechanisms, such as engines
in air compressors, fans, and pumps.
LHC Heavy Duty Cross Flow Cooling Tower
PRODUK DETAIL
LDC Square Counter Flow Cooling Tower
a wedge-shaped belt manufactured out a rubber
compound, reinforced with a tensile cord specifically
engineered to transmit power into movement. V-belts
can be found in driving mechanisms, such as engines
in air compressors, fans, and pumps.